How To Set Up a Smart Band Watch
1. Basic Layout
2. Charging the Device
Please charge the device before use the smart bracelet. The machine adopts USB
charging, and it needs to pull out the watchband with buckle said, expose the
charging head, and then insert the charging head in the correct direction into
the USB charger or computer USB port.
Charger: Voltage 5V
Charge time: about1.5-2 hours
3.1 Main interface
After the device has been connected via Bluetooth successful with your
phone, the time will auto synchronize correctly with your phone.
3.2 Pedometer / Distance/ Calories
3.3 Heart Rate Monitor
Cycle through to the heart rate page then get start, and the heart rate
icon will flicker, it will be better to wear the smart bracelet on your
left hand, 1.5cm after styloid process of the ulna, and please make sure
the heart rate sensor close to your skin. On App there will show your
heart rate data every 30 minutes tested or others you sets by device
3.4 Blood Pressure Monitor
Pressing the touch button turns to the blood pressure screen get start. And the
icon will flicker (please stay still when test the blood pressure) if you need
save the data of test result, please operate this function by APP. Manual start
this function on the device the data will not save on the APP
3.4 SpO2 Monitor
3.5 Sleeping Monitor
Device will monitor sleeping data automatically, please check the sleeping detail data on APP dashboard.
When the bracelet is turned on, sleep is turned on by default. The sleep monitoring period was 22:00 p.m. to 08:00 a.m., the end of the bracelet displayed sleep data, and the sleep data generated that night, Connect to Bluetooth real-time to the phones APK (note:synchronization precondition: APK to bind the bracelet).
Long press touch button, can enter the second level to perform related functions.
1.Turn on the smart bracelet.
2.Turn on your smartphone's wi-fi capability, scan the qr code below to download
the “FunDo”APP or search for "FunDo" downloads in GooglePlay or apple's
3.Download “FunDo” APP and run it.
4.After the installation is completed, in the "more"/ "+ add device", select
the corresponding Bluetooth name from the list (for example: QW18), and click
it connect to the corresponding bracelet. The time、 date、 language (many
language may not be supported) will automatically synchronize the mobile
4.1 Bluetooth Remove
- Delete the Bluetooth on the APP
- Turn off the APP on the smart phone
- Remove the Bluetooth on the setting of the smart phone
4.2 Bluetooth automatic reconnect
When the bracelet reaches the Bluetooth connection range, it will
automatically reconnect the bracelet.
5. How to use APP
After install FunDo APP, you may required to fill your personal information
such as gender、weight etc. Then please connect smart bracelet via Bluetooth
(Please reference to the Bluetooth Paring Steps)
After successful connection between the bracelet and the mobile APP, the
movement data will be synchronized automatically.
FunDo APP can also be used separately from the bracelet. As an application
of mobile phone, it can realize data collection of various sports modes. The
mobile phone location service (such as GPS) can be opened in the movement, and
the real-time display of motion trajectory can be realized.
Tap to check Steps Distance/Calorie data etc.
These five modes need to connect the bracelet to complete the data
collection and synchronize to the mobile APP in real time. Show below:
5.3 Analysis and Report
Sports data can be Shared with friends by clicking the icon at the top right corner.
The following functions can only be realized under the premise that the
mobile APP is successful.
◯ Notifications Function
Include call notification, SMS notification, application message push
such as QQ message push, "WeChat message" push and other functions.
◯ Take a photo
You can use the bracelet to control your phone to take a photo
◯ Find Device: The bracelet will be vibrate and bright screen.
◯ Sedentary and drinking water remind
Turn on this function，set the monitoring period, the bracelet can remind
you to drink water or sport at regular intervals during the prescribed time.
It is three modes for you select:
Vibration、 Bright screen、Bright screen +Vibration
◯ Alarm clock remind
◯ Raise hand
Turn on this function, when you lifting hand to tilt the bracelet inward,
facing the wearer straight ahead, the bracelet automatically bright screen.
◯ Heart rate test
Open heart rate detection, set the detection time period, the bracelet
can detect the heart rate within the specified time.
◯ Do not disturb mode
After you open the "do not disturb mode", except alarm clock, all
notifications in the Settings are not reminded, and the bracelet will
no longer have automatic bright screen vibration reminder.
Check the APP version, and the user can check for new version updates also
Display: LCD TFT 0.96
Standby time: 7 days
Support system: IOS 8.0 or above, Android 4.4 or above
Heart rate monitor: support
Blood pressure: support
Auto screen light: support
Bluetooth: BLE 4.0
Why Bluetooth disconnected and incoming calls and messages do no remind:
1. Please keep APP and smart bracelet both turn on.
2. Please keep smart phone and smart bracelet within 8 meters.
3. There is some smart phone, will turn off APP automatically in order
to save power. In this case, please set your phone on Mobile Manger
or security center accordingly to allow APP turn on always.
4. Turn off the power saving mode.
5. When you have these problems, and not know how to set，please ask
for services online.
Note: This device not for medical use, test data just for reference.